DFM turn clamp features and points of use

- Nov 28, 2018-

The user can determine the rated load range of the DFM turn clamp according to the usage. The device is suitable for horizontal lifting of steel plates and overturning of steel plates and sections. The main structural features are small, light and easy to operate. The single turning pliers allow the lifting weight to be the rated load. It can be used alone in the lifting operation, and the beam must be added during horizontal lifting.


The main components of the DFM inverting caliper are forged from alloy steel dies and heat treated to ensure high strength and durability. It is important to remember that the steel plate tongs must be used within the allowable load range and should be used within the allowable plate thickness. It should not be used for heavy lifting, stage hoisting, total hoisting, hoisting and horizontal hoisting. Other personnel should never enter the drop or flip area.


During the operation of the DFM inverting the lifting clamp, attention should be paid to the uniform control of the lifting speed. In order to avoid the weight of the hanging objects, more than two lifting tools are used for safety. Check before use, bite, gasket, blockage between teeth, wear and other abnormal phenomena, and then use after inspection.