1. The specific application of horizontal lifting steel lifting clamp
Horizontal hanging steel lifting clamp, which is one of the steel lifting clamps, which is a horizontal lifting of the steel plate in a specific application. This kind of steel plate lifting clamp is made of high quality low carbon alloy steel, and its rated load should be known during use, because it can not be overloaded. In addition, in the hoisting operation, generally two or four supporting groups are used.
2. Q275 carbon structural steel, can it be used to manufacture horizontal lifting steel lifting clamps?
Q275 carbon structural steel has a yield point of 225-275 MPa, a tensile strength of 490-630 MPa, and an elongation of 15%-20%. This material has high strength and certain welding properties. In addition, it has good plasticity and machin ability. Therefore, it can be used to make high-strength mechanical parts. As for whether it can be used to make horizontal cranes. Steel plate lifting clamps are determined by whether it can meet the manufacturing and performance requirements of steel plate lifting clamps.
3. Precautions for use of horizontal lifting steel lifting clamps
(1) Lifting work is carried out with horizontal lifting steel lifting clamps. The operators should go through the induction training and pass the examination before they can work on the job. Other personnel are strictly forbidden to carry out this work.
(2) Horizontal hanging steel lifting clamps, which are also required to have corresponding requirements in terms of materials, etc. 1, therefore, should be clearly understood to avoid damage to the lifting clamps due to overload or super performance.
(3) When the horizontal lifting steel lifting tongs lift the articles, there shall be no people in the lifting area below them, and personnel shall not enter the area.
(4) During the lifting of the item, the lifting clamp is strictly prohibited from being impacted or impacted. If the item is heavy, it is strictly forbidden to stay in the air for a long time.
4. Purchase of horizontal hanging steel lifting clamps
The purchase of horizontal lifting steel lifting clamps is also an important task, so it cannot be treated and carried out. In the purchase, there are some considerations, in order to determine the type of tongs that you need, select and determine by the load and the thickness of the board. In addition, it is necessary to check the appearance of the product, whether there are defects such as cracks and breakage, and whether the surface is smooth and smooth.