Inspection method and cleaning method of the oil drum lifting clamp

- Mar 04, 2019-

The oil drum lifting clamp is a tool for lifting the oil drum. It also has its own dangerous property when it is used. This requires careful inspection before use to reduce the risk. In order to prevent this product from being used. Suddenly the lifting cylinder fell and injured people, we need to check.

 

Check the surface of the oil drum lifting clamp. The surface of the steel plate clamp should not have cracks, wear and burrs, etc., and the same can not be the case with the same oil drum. Check the lifting ring and the shaft hole. The lifting ring mainly checks whether the surface is worn or not. The shaft hole mainly checks for cracks. Check the opening of the caliper body. The opening of the caliper body is mainly checked whether the size of the opening is acceptable or not, and there is no deformation.

 

Of course, it is necessary to carry out the test lifting of the oil drum lifting clamp. The test hanging is to check whether the oil drum lifting clamp can withstand twice the weight of its rated load. If the test can, it means that there is no problem, if not Then you need to replace it. Although the drum lifting clamp is only a lifting tool rather than a lifting device, the inspection before use is very important and must be in place before use.

 

Oil drum lifting clamps Because the links of various parts are very complicated, we need to patiently clean them. When cleaning, we need to clean them with soft things such as rags. Secondly, we use rags to clean them from top to bottom, especially for steel plates. The rotating part--bolts and bearings and threads are thoroughly cleaned and cannot be sloppy, because these rotating parts are not cleaned and will be blocked when the operation is performed, which increases the wear and tear of the machine and speeds up the oil drum. The scraping pliers are scrapped.


Http://www.fengyinghoisting.com