Management and inspection requirements for Steel Plate Handling Clamps

- Mar 18, 2019-

Management and inspection of Steel Plate Handling Clamps

 

After the indoor management of the Steel Plate Handling Clamps by use, do not place the steel plate clamps outdoors.

 

It must be sorted and managed according to the purpose.

 

Steel plate handling pliers are often inspected and repaired before use of steel plate clamps, must be inspected to ensure that the steel lifting clamps are safe and at least once a month to check and repair the steel lifting clamps, regardless of the number of work, During the inspection and maintenance, be sure to oil the steel plate clamp.

 

Prohibit the use of dangerous steel wrenches

 

Steel lifting clamps with deformation or damage were found, must be prohibited, and parts should be replaced immediately

When starting work, be sure to check the inspection label.

 

Steel plate handling pliers recommend early replacement of parts

 

It is very dangerous to use replaceable parts to the maximum limit of use. For the handling of high hardness or the lifting of the same steel plate, the cam and the screw clamp must be replaced in advance.

 

http://www.fengyinghoisting.com