Structural features of hand-carrying turntable load moving

- Mar 26, 2018-

The hand-carrying turntable load moving are used when there is no external traction equipment to cooperate with or when the transporter is too low. Hand-carrying turntable small tanks are suitable for cement floor workshops, outdoor venues, and epoxy floor applications. This small tank can handle machine tools, injection molding machine handling, and large-scale air-conditioning transportation. After that, it can also transport boilers and carry pressure vessels.

 

Speaking of handling the structure of the hand-carrying turntable load moving, the actual use of the material is the alloy rigid material as the carrying frame, and its overall structure will also include turntables, turntable steel balls, bearing plates, side plates, alloy steel axles, and rollers. , roller bearings and other components.

 

All the load-carrying parts (steel) on the hand-carrying carousel small tanks have been processed by the quenching process. In this respect, the bearing strength and the wear resistance thereof can be guaranteed. The machining of the alloy rigid axle and the roller wheel bone through CNC machining ensures the accuracy of these components and enables the accurate integration of the equipment with other components.

 

The hand-carrying turntable load moving will be equipped with an anti-backup device when it is in use. It can only be advanced in one direction. If it needs to be reversed, it will need to turn the pawl and screw it into the small hole next to it. Only when the pawl fails can it be retrogressed.

 

Before the hand-carrying turntable load moving is in use, it is necessary to conduct an overall inspection of the equipment to confirm that there is no abnormality in the entire machine before use. Hand-operated turntable small tanks need to be used with a claw jack or a low position when used. The claw jack directly lifts the bottom of the equipment or the heavy object. After that, it is necessary to pay attention to placing the equipment on the bearing of the equipment, and adjust the angle of all the equipment to the same direction. After it is set, check it. The location of the contact can only be safely transported.

 

http://www.fengyinghoisting.com/