The steel plate handling pliers are made of low-carbon high-quality alloy steel. The single test is used for the rated load. It can be used only in the lifting operation. When lifting horizontally, the beam must be added. Of course, for safety reasons, the steel plate handling pliers must not collide with the object during lifting; the test load is 2 times the maximum working load; overloading is strictly prohibited.
After the steel plate handling pliers are used properly, they should be properly treated and maintained. We must clean the steel plate handling pliers in the first time, wipe off the dust, water stains and other dirt on the surface of the equipment to ensure the surface of the steel plate clamp is dry. After the cleaning is completed, whether there is crack on the surface of the steel plate conveying pliers, and whether there is deformation at the hole of the tongs, the equipment should be inspected in time to avoid delay in normal use.
Apply a layer of lubricant to the surface of the steel plate handling pliers and store it in a dry environment. When storing, be careful to store the intact equipment separately from the damaged equipment, so as to avoid the inability to distinguish when using, and ensure the durability of the steel plate handling pliers.