In practical applications of steel plate lifting tongs today, it is difficult to remove the bearing nut and the bolt portion of the bearing nut from the lubricating oil, and to position the ball chuck and the clamping bolt to prevent the grease from adhering to the bolt. Collusive use, causing unnecessary damage. It is forbidden to use indoors due to outdoor weather or temperature differences, and how can we better use steel plate lifting clamps because of rusty steel plate lifting clamps?
The current new type of steel plate lifting clamp is a lifting tool for lifting steel plates, which is light and easy to install. It is more practical to use steel plate lifting clamps to lift steel plates because the steel plate itself is dangerous to the operator, so if Improper lifting of steel plates and proper knowledge of safety precautions will also bring great danger. No matter which lifting method is used or whatever project is used, the process is very important, so personal safety should be considered In place, this is critical, and hoisting and lifting work must be performed by a qualified operator, explaining the familiar operating requirements.
Therefore, only by knowing these now can we ensure that the steel plate lifting clamps will not cause dangerous accidents during use. Choose the user's own lifting method and steel plate size steel plate lifting clamps. After use, check whether the steel self-locking device plate clamp is sensitive and It is firm, whether the firmware is loose, and whether all components are stable. The test can be used without any problems. It is necessary to check whether the steel plate lifting clamps bit the steel plate and whether the operation is correct.
In different production and processing fields, when steel plate lifting clamps are required, such equipment should be selected according to the actual application, and the installation position of the steel plate lifting clamps is lower than the installation position. At the same time, the safety of the lifting clamps must be confirmed. And the decline of the lifting state must be considered, especially when the lifting material is grounded, the operating requirements must be familiar, and the safety procedures must be followed.