Now, in the practical application of the new explosion-proof steel plate lifting clamp, it can be connected to the mounting hole by bolts. The upper end of the claw is welded with a lifting plate. The lifting plate has a lifting hole below the lifting plate. The top of the clamping body has pliers teeth. Now, according to the specific lifting requirements, the distance between the claw and the pliers body can be flexibly adjusted to meet the application requirements of clamping multiple steel plates at one time. What are the structural design requirements?
Among them, the steel plate lifting clamp is an efficient spreader for quickly loading and unloading steel plates and equipment types, and its specifications and uses are becoming more and more widely. At present, by understanding the composition and principle of crane steel plate lifting clamps, steel plates have been completed. The structure of the lifting clamp meets the current domestic production and test conditions. Therefore, the current structural design of the steel plate lifting clamp has met the actual application requirements. When the crane steel lifting clamp is seen in application, the steel plate slips off And the effective method to solve the short problem by using the claw, a new type of lifting clamp anti-falling device is used.
The lifting clamp anti-fall device includes an understanding lever, as well as the return spring and limit switch used. The anti-fall interlocking device is installed on the clamp feet. The upper part of the clamp has a hole, and the return spring with limit switch and hole is built in. The plunger is placed on the limit switch through the bearing, so it can be used well. Now the new steel plate lifting clamp includes the design of the main structure of the lifting clamp, and the main body of the steel plate lifting clamp is used as the cavity structure.
Therefore, the main structure of the steel plate lifting tongs is that the pliers are connected to the main body through a suspension rod, so the suspension rod extends into the inside of the steel plate lifting tongs, and the rotating rod is connected to the suspension rod. The mechanism and the operation mechanism cooperate to clamp the steel plate, and the steel plate can be clamped firmly without manual assistance, thereby improving the loading and unloading efficiency and improving the safety.